E3 CNC down after fire – follow updates here…
Wednesday Morning there was an incident on the E3, where a drill operation caugt fire in a 30mm MDF board. The fire was quickly brought under….
Category: Workshop
Extraction blocked by oak from planer – again.
Please be mindful when planing oak in the thickness planer. Cutting to thick and too fast might block the extraction, and damage the planer…
Extraction blocked at Kap Saw
Fixed with a high pressure tube and compressed air and a little magic and a lot of patience and a bit of luck… Working for now….
Martin serviced by Slejpner
On Thursday morning Slejpner Maskiner A/S gaver the Martin T60 the big overhaul. A lot of cleaning and lubricating. Some fine calibrations.And a couple of new….
Laser Cutter – Bed Calibrated
The bed of the lasercutter was misaligned. It has been disasembled, fixed and calibrated.
E2 CNC – Extraction hose replaced
The extraction hose has been replaced with e new hose from Felder, that is much more flexible – and therefore causes a lot less stress on….
Two Plate Trolleys fixed with new or refurbished wheels
Please accept the trolley restrictions: Breaking these very simple rules might lead to removal of plates – and a service fee of DKK 500,-
Martin Saw – New Blades
The Rough cut and the Fine cut blades have been changed today…